ST888
Ex Tax: $0.00
The oven is designed to operate at 650°F maximum temperature and includes the following special features:
- 4.5 inch thick insulated walls, ceiling and a 3/16 plate floor
- 1 Circulation fan
- CRS exterior painted machine gray
- Aluminized interior
- UL listed Control Panel
- Single set point electronic temperature controller
- High limit
- 600 CFM exhaust
- Door switch (shuts heat, recirculation down when door is open)
- Full 8 x 8 doorway
Batch Oven Specifications:
|
Effective Work Area: |
96 W x 96 H x 96 L |
|
External Dimensions: |
128 W x 138 H x 109 L |
|
KW: |
100 KW |
|
Recirculation Fan: |
23,000 CFM; 7.5 HP |
|
Electric: |
TBD |
Oven Construction:
Outside:
The exterior of the oven will be constructed of heavy gauge carbon steel with structural members, painted a machine gray.
Inside:
The interior of the oven will be constructed of Aluminized steel.
Insulation:
Non settling 8lb density mineral wool insulation will used to insulate between the inside and outside of the unit.
Circulation system:
One 36 inch Dia fans will be driven direct by 7.5 HP 1725 TEFC motors. The airflow pattern will be horizontal. The air will enter the chamber from the right hand wall and return through the left. The pressure walls will be louvered for adjustability. There will be a pressure differential switch located on the circulation in the event of the loss of air the circulation system will shut down.
Heating system:
The unit will utilize 24- 4166W Incoloy sheathed heating elements. The elements will be housed in the plenum to heat the air to desired temperature. The plenum will be top mounted. The heaters will be controlled by Watlow Din-a-mite SSRs.
Doors:
The unit will have two doors held closed by FM approved slam latches. The door gasket will be a silicone P type extrusion.
Control Console:
The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated
Exhaust:
The unit will have a 600 cfm forced exhaust for fume removal. The outlet will be 8 dia.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
