ST996
Ex Tax: $0.00
The oven is designed to operate at 450°F maximum temperature and includes the following special features:
- 4" thick insulated walls, ceiling and a 3/16" Plate floor
- 2-30" Circulation fans
- CRS exterior painted slate gray
- Aluminized interior
- UL listed Control Panel, 208/3/60 primary power
- Yokogawa electronic programmable temperature controller UP550-00
- Yokogawa high limit
- 2- 1" stainless steel ports located per customer detail
- Exhaust blower 600 CFM
Batch Oven Specifications:
|
Effective Work Area: |
9'4" W x 6'1" H x 9'2" L |
|
External Dimensions: |
11'11" W x 10'0" H x 9'9" L |
|
KW: |
75 KW |
|
Recirculation Fan: |
4000 CFM; 2 HP |
|
Electric: |
208/3/60 - 225 amps; 300 amp breaker recommended |
Oven Construction:
Outside:
Oven to be constructed of heavy gauge carbon steel and structural members for support, painted slate gray.
Inside:
Oven to be constructed of Aluminized steel.
Insulation:
Non settling mineral wool insulation will used to insulate between the inside and outside of the unit.
Floor:
The floor will be a 3/16" plate floor.
Circulation System:
Two 30" Dia fans and shafts, Horizontal airflow from right to left.
Heating System:
30- 2500W Incoloy sheathed heating elements will be housed in the plenums to heat the air to desired temperature.
Doors:
The unit will have two doors held closed by FM approved slam latches.
Control Console:
The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated
Exhaust Blower:
The unit will have a 600 CFM exhaust blower located on the top right of the unit. The blower will be controlled manually by a switch located on the control panel.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
