TL333
Ex Tax: $0.00
The oven is designed to operate at 500°F maximum temperature and includes the following special features:
- 4.5" thick insulated walls, ceiling and floor
- 1" Circulation fan
- CRS exterior painted machine gray
- Aluminized Interior
- UL listed Control Panel
- Yokogawa electronic single set point temperature controller (UT150) and high limit (UT150L)
- Eagle signal process timer
- Top Load door
- Reinforced floor
Batch Oven Specifications:
Effective Work Area: |
36" W x 36" H x 36" L |
External Dimensions: |
72" W x 48" H x 60" L |
KW: |
9 KW |
Recirculation Fan: |
1200 CFM; 3/4 HP |
Electric: |
TBD |
Oven Construction:
Outside:
Oven to be constructed of heavy gauge carbon steel and structural members and painted a machine gray
Inside:
Oven to be constructed of Aluminized Steel
Circulation system:
An 18" Dia fan and shaft, Combination airflow from front and back to right side.
Heating system:
Six 1500W Incoloy sheathed heating elements will be housed in the plenum to heat the air to desired temperature.
Doors:
The unit will have one door held closed by an over center latch. The door will be a Top loading design with a mechanical counterweight.
Control Console:
The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: