HT646
-500x500.jpg "HT646")
Ex Tax: $0.00
The oven is designed to operate at 1200°F maximum temperature and includes the following special features:
- 8" thick insulated walls, ceiling and floor.
- 1" Stainless Circulation fan
- CRS exterior painted machine gray
- Stainless interior
- UL listed Control Panel
- Electronic single set point temperature controller
- High limit
- Door Switch
- Uniformity +/- 10F
Batch Oven Specifications:
|
Effective Work Area: |
72" W x 48" H x 72" L |
|
External Dimensions: |
116" W x 99" H x 96" L |
|
KW: |
75 KW |
|
Recirculation Fan: |
9000 CFM; 7.5 HP |
|
Electric: |
TBD |
Oven Construction:
Outside:
Oven to be constructed of heavy gauge carbon steel & a full structural frame, painted machine gray. The front of the unit will be painted a high temperature black.
Inside:
Oven to be constructed of Type 304 Stainless Steel.
Circulation system:
One 30" Dia fans and shaft, combination airflow from sides to top. The pressure and return walls will be louvered for adjustability. The floor will be reinforced to handle a 3,000 lb load.
Heating system:
24- 3120 Watt heaters will be housed in the plenum area to heat the air to the desired temperature. The heat will be controlled an SCR located in the control panel.
Control Console:
The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated
Uniformity:
The unit will pass a 9 point survey +/-10F in 80% of the empty chamber.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
