HT333IG
Ex Tax: $0.00
The oven is designed to operate at 1200°F maximum temperature and includes the following special features:
- 8 inch thick insulated walls, ceiling and floor
- 1" Circulation fan
- CRS exterior painted machine gray
- Stainless interior (fully sealed)
- CUL listed Control Panel
- Electronic Programmable temperature controller and high limit
- Inert atmosphere (flow meter, pressure gauge & delivery port)
- Adjustable Stand
- Cool down jacket with forced exhaust
- Process flow rate of 120 SCFH
- Purge Flow rate of 150 SCFH
- Cool down Jacket with forced exhaust
Batch Oven Specifications:
Effective Work Area: |
36" W x 36" H x 36" L |
External Dimensions: |
78" W x 80" H x 55" L |
Weight: |
2700 LBS |
KW: |
30 KW |
Recirculation Fan: |
1200 CFM; 3/4 HP |
Electric: |
TBD |
Oven Construction:
Outside:
Oven to be constructed of heavy gauge carbon steel and structural members and painted machine gray. The face of the unit will be painted a high temperature black.
Inside:
Oven to be constructed of Stainless Steel. The chamber will be welded & sealed.
Circulation System:
An 18 inch Dia fan and shaft, Horizontal airflow from right to left.
Heating System:
12- 2500W Incoloy sheathed heating elements will be housed in the plenum to heat the air to desired temperature.
Doors:
The unit will have one door held closed by a two or three point positive cam latching system.
Control Console:
The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated.
Inert Atmosphere:
The unit will have an inert atmosphere option. The unit will be supplied with a solenoid valve, regulator, gauge and delivery system; the chamber will be welded and sealed to ensure a positive pressure in the chamber. A relief valve will also be supplied in the event the chamber pressure exceeds the desired limit.
The unit will have a purge cycle before allowing the heat to come on.
Assisted Cool-down:
The unit will have an air jacket around the liner. There will be an intake damper and a forced exhaust that will come on during the cool down cycle.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: