L5.8
Ex Tax: $0.00
The oven is designed to operate at 650°F maximum temperature and includes the following special features:
- 4.5 thick insulated walls, ceiling and floor
- 6 dia single inlet blower wheel
- CRS exterior painted machine gray
- Stainless interior
- UL listed Control Panel
- Single set point controller
- High limit
Batch Oven Specifications:
|
Effective Work Area: |
25 W x 20 H x 20 L |
|
External Dimensions: |
48 W x 49 H x 36 L |
|
KW: |
9 KW |
|
Recirculation Fan: |
400 CFM; 1/4 HP |
|
Electric: |
TBD |
Oven Construction:
Outside:
Oven to be constructed of heavy gauge carbon steel and painted machine gray
Inside:
Oven to be constructed of stainless steel.
Circulation system:
A 6 diameter x 4 thick single inlet blower wheel will drive the air into the chamber from the left side bottom. The air will circulate in a horizontal pattern from right to left.
Heating system:
6-1500W Incoloy sheathed heating elements will be housed in the plenum to heat the air to desired temperature.
Doors:
The unit will have one door held closed by a positive latching system. The door swing is from right to left.
Control Console:
The control panel for the oven will be underneath the work chamber. The panel will house the electrical components and be NEMA 1 and UL rated.
Intake & Exhaust:
The unit will have a natural intake and exhaust port of 3 inch diameter.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
