ST484
Ex Tax: $0.00
The oven is designed to operate at 500°F maximum temperature and includes the following special features:
- 3 thick insulated walls, ceiling and a 3/16 plate floor.
- 1-24 Circulation fan
- CRS exterior painted slate gray
- Aluminized Interior
- UL listed Control Panel, 220/3/60 primary power
- Yokogawa UP55A (replaces UP550-00) electronic programmable temperature controller and high limit
Batch Oven Specifications:
Effective Work Area: |
4 0 W x 8 0 H x 4 0 L |
External Dimensions: |
6 5 W x 10 5 H x 5 2 L |
BTU: |
30 KW |
Recirculation Fan: |
2400 CFM; 3/4 HP |
Electric: |
o 220/3/60 - 85 full load amps; 110 amp service required |
Oven Construction:
Outside:
Oven to be constructed of heavy gauge carbon steel and painted a slate gray
Inside:
Oven to be constructed of Aluminized steel.
Circulation system:
One 24 Dia fan and shaft, Vertical up airflow from bottom to top. A pressure switch will shut the heat down in the event of the loss of air flow.
Heating system:
12- 2500 Watt heaters will heat the air to the desired temperature; they will be located in the plenum located in the top of the unit.
Doors:
The unit will have two doors held closed by FM approved slam latches.
Control Console:
The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: