ST1248
Ex Tax: $0.00
The oven is designed to operate at 500°F maximum temperature and includes the following special features:
- 4.5 inch thick insulated walls, ceiling and a 3/16" plate floor
- 1" Circulation fans
- CRS exterior painted machine gray
- Aluminized interior
- UL listed Control Panel
- Electronic temperature controller and high limit
- Eagle signal process timer
- 1.5 million BTU burner
- 1200 CFM exhaust with VFD drive
- Modular construction
- Air balancing for even heat distribution
Batch Oven Specifications:
Effective Work Area: |
192" W x 77" H x 144" L |
External Dimensions: |
222" W x 112" H x 156" L |
BTU: |
1,500,000 BTU |
Recirculation Fan: |
10,000 CFM; 7.5 HP |
Electric: |
TBD |
Oven Construction:
Outside:
Oven exterior to be constructed of heavy gauge carbon steel with structural members and painted machine gray
Inside:
Oven interior to be constructed of Aluminized steel.
Insulation:
Non settling mineral wool insulation will used to insulate between the inside and outside of the unit.
Circulation system:
1 36 inch Dia fan and shaft, The airflow will be horizontal from right to left.
Heating system:
A 1,500,000 BTU Gas burner will be mounted on the back of the oven firing into the plenum located on top of the oven, the burner will heat the air to desired temperature.
Doors:
The unit will have two doors held closed by FM approved slam latches. The doorway will be 10" open on the 16ft direction
Control Console:
The control panel for the oven will be on the Left hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated
Exhaust:
A 1200 CFM exhaust will be located on the top of the oven. The exhaust outlet will be 8" dia. The exhaust will have a VFD to control the speed of the motor. The VFD will be located in the control panel.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: