PhoneEmail JPW Industrial Ovens & Furnaces


Product Code: SKU0050
Price: $0.00
Ex Tax: $0.00
   - OR -   

The Conveyor oven is designed to operate at 500°F maximum temperature and includes the following special features:

  • 4.5" thick insulated walls, ceiling and floor
  • CRS exterior painted slate gray
  • Aluminized interior
  • Conveyor, Wire mesh 48"- with side plates- herringbone design support
  • Yokogawa UT150 single set point controller
  • Yokogawa UT150L High limit
  • Variable speed drive on conveyor to run .059 feet per minute
  • Silicone curtains on exit ends
  • Skid frame bottom support to raise belt to 52" from floor
  • Class B oven
  • CUL Control panel 575V/3/60
  • 12"lg x 4"w heated zone-
  • 1" air gap between heated zone and cooling zone
  • 2" cooling zone- ambient forced air
  • 2-30" dia circulation fans
  • Vertical down airflow
  • 1- 18" cooling fan
  • 1 ft take up end
  • Fused rotary disconnect
  • Access door on feed end opposite flanged connection

Batch Oven Specifications:

Effective Work Area:

4' 0" W x 2' 0" H x 15' 0" L

External Dimensions:

6' 5" W x 9' 0" H x 16' 0" L


75 KW

Recirculation Fan:

9000 CFM; 5 HP


575/3/60- 92 amps; 125 amp breaker recommended

Oven Construction:


The exterior of the oven will be constructed of heavy gauge carbon steel, structural members and painted a slate gray. The exit and feed ends will be painted a high temperature black


The interior of the oven will be constructed of Aluminized steel.

Circulation system:

Two 30" dia fans and shafts will be driven by 5 hp 1725 rpm motors generating 9,000 cfm of recirculation air. The air pattern will be vertical down returning through the left.

Heating system:

30- 2500 watt incoloy sheathed heating elements will be housed in the plenum separate from the work chamber to heat the air to the desired temperature. The plenum will be top mounted


The unit will have one silicone curtain one at the end of the heated zone.

Control Console:

The control console will be mounted on the left side center of the chamber. It will hold all the electrical components and be CUL listed.


The conveyor belting will be 48" wide wire mesh belt with side plates. The drive end will have drive sprockets mounted on a 1.5" dia bearing shaft. The take up end will have sprockets mounted on a 1.5" dia bearing shaft with a tensioner at each side. The drive will be a variable speed gear box to achieve .059 feet per minute. The drive motor will be an inverter ready motor.


The oven will be mounted on a base that brings the working level of the oven to 52" from the plant floor the base will be insulated and be a skid design.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:


Composite curing ovens anneal, cure, dry and harden composite and synthetic materials. Primarily driven by the aerospace and aircraft markets, these ovens are commonly used to process and manufacture parts from landing gear to fuselage to wing sections. Most composite curing applications are unique.


Where did you grow up? High School?  

Born and raised in Antes Fort, Pennsylvania, a community located in Lycoming County, Briana Conway, graduated from Jersey Shore Area High School.

Cabinet Ovens

These chambers are designed to meet your most demanding needs. Our precision engineering, heavy duty construction and exceptional performance along with a variety of airflow patterns and optional equipment provide the right solution for your heat processing requirements. Standard sizes range from 3.3 cuft up to 96 cuft and standard temperatures up to 650F. For chambers above 650F please inquire about our HT series cabinet ovens.

Custom Ovens

JPW Industrial Ovens & Furnaces offers the know-how, experience, innovation and creativity to provide custom-made ovens tailored to each customer's unique need.

Lab/Bench Ovens

The Lab/Bench series of ovens offer custom options at an affordable price with a large selection of sizes available. Each oven comes standard with the following features; voltage specific, UL listed control enclosure, airflow, TEFC circulation motor.

Continuous Process Ovens

Our Continuous Process Ovens feature welded steel structural units, heavy gauge interiors, and operate at temperatures up to 1250°F and are used for a wide range of applications.

Heat Treating Ovens

Heat Treating Ovens can be used for treating a variety of metals and glass to harden or soften a material through extreme heating and chilling. Heat Treating Ovens can be used for aging, annealing, drying, soldering, tempering, etc.

Walk-In Ovens

The Walk-In series of industrial ovens offer custom options at an affordable price with a large selection of sizes available. Each oven comes standard with the following features; UL listed control enclosure, airflow, TEFC circulation motor.

Industrial Oven Model Listings

Browse through our online industrial oven models: Industrial Cabinet Ovens, Industrial Custom Ovens, Industrial Lab/Bench Ovens, Industrial Continuous Process Ovens, Industrial Heat Treating Ovens, Industrial Walk In Ovens.

Contact Us

JPW Industrial Ovens & Furnaces matches up your needs to the right process equipment. View our contact information or request a quote today.

About Us

JPW Industrial Ovens & Furnaces makes custom-made industrial ovens. Our Cabinet, Custom, Lab/Bench, Continuous Process, Heat Treating, and Walk-In Ovens are crafted to suit our customers' needs. We offer design, prototyping, welding and assembly.


All industrial ovens from JPW Industrial Ovens & Furnaces Inc. carry our standard warranty of 1 year on parts and 90 days on labor from the date of purchase.