ST333-4
Ex Tax: $0.00
The oven is designed to operate at 650°F maximum temperature and includes the following special features:
- 4.5 thick insulated walls, ceiling and floor
- 1 Stainless Circulation fan
- CRS exterior painted machine gray
- Stainless interior
- UL listed Control Panel
- Yokogawa UT150 single set point electronic temperature controller and UT150L high limit
- 140 CFM Exhaust
Batch Oven Specifications:
|
Effective Work Area: |
36 W x 36 H x 36 L |
|
External Dimensions: |
68 W x 63 H x 49 L |
|
BTU: |
18 KW |
|
Recirculation Fan: |
2400 CFM; 3/4 HP |
|
Electric: |
TBD |
Oven Construction:
Outside:
Oven to be constructed of heavy gauge carbon steel and painted machine gray.
Inside:
Oven to be constructed of stainless steel.
Circulation system:
An 18 diameter fans and shaft, Horizontal airflow from right to left.
Heating system:
12- 1500W Incoloy sheathed heating elements will be housed in the plenum to heat the air to desired temperature.
Doors:
The unit will have four doors held closed by Positive latches.
Control Console:
The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated.
Exhaust:
The unit will have a 140CFM exhaust; the exhaust will be operated manually by turning on an exhaust switch. The exhaust outlet will be 4 diameter.
Read more about the various industries the ST333 is used in.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
