ST103

ST103
Product Code: SKU0040
Price: $0.00
Ex Tax: $0.00
Qty:  
   - OR -   

The oven is designed to operate at 500°F maximum temperature and includes the following special features:

  • 4.5 inch” thick insulated walls, ceiling and a floor with tracks on top of floor for carts.
  • 1” Circulation fan
  • CRS exterior painted machine gray
  • Aluminized interior
  • UL listed Control Panel
  • Temperature controller and high limit
  • 600 CFM exhaust
  • Purge timer with indicating light
  • 500,000 BTU gas burner
  • 70 air changes per minute
  • Includes manual with drawings, parts list, sequence of operations, etc

Batch Oven Specifications:

Effective Work Area:

52” W x 66” H x 52” L

External Dimensions:

81” W x 110” H x 89” L

BTU:

500,000 BTU

Recirculation Fan:

4000 CFM; 5 HP

Electric:

TBD

Oven Construction:

Outside:

Oven to be constructed of heavy gauge carbon steel and painted machine gray

Inside:

Oven to be constructed of Aluminized Steel.

Circulation system:

One 24 inch” Dia fan and shaft, vertical up airflow from bottom to top. A pressure switch will shut the heat down in the event of the loss of air flow. The return diffuser will have adjustable louvers to control uniformity. The air will be entering the chamber at the bottom and return through the top diffuser.  

Heating system:

A 500,000 BTU gas burner will be housed in the plenum located in the back of the unit, it will heat the air to the desired temperature. The burner will have an NFPA 86 gas train. The burner will have a digital flame error read out for trouble shooting.

Doors:

The unit will have two doors held closed by FM approved slam latches.

Control Console:

The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated

Purge Timer:

The unit will have a purge timer. The timer will not allow the heat to come on until the timing cycle has counted down

Exhaust:

There will be a 600 CFM exhaust on the oven to remove the by products of combustion.

Controls:

Temperature controller,and high limit.

Uniformity:

The chamber will hold +/- 5F at 300F. This is in 80% of the empty cube at JPW. JPW can do testing and adjustments to get uniformity under loaded conditions if required. There will be additional cost to test under load.

Time to Temperature:

The unit will meet the specification of 300F in 10 Minutes under load from ambient conditions.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



News
09/22/2017

Three new ST4610 models were recently purchased from JPW by a repeat customer. The ST4610 includes carts to transport product in and out of ovens on installed tracks. This model is specifically designed with two heat banks to ensure continual operation.


09/19/2017

The HT432 is a high-temp cabinet oven measuring 48Wx36Hx24D. This oven is electrically heated and boasts a max operating temperature of 1300F, with a tight uniformity of +/- 10 at 600C. This high-temp cabinet oven will be used to facilitate a specialized process used to burn out binder.


Cabinet Ovens

These chambers are designed to meet your most demanding needs. Our precision engineering, heavy duty construction and exceptional performance along with a variety of airflow patterns and optional equipment provide the right solution for your heat processing requirements. Standard sizes range from 3.3 cuft up to 96 cuft and standard temperatures up to 650F. For chambers above 650F please inquire about our HT series cabinet ovens.

Custom Ovens

JPW Ovens & Furnaces offers the know-how, experience, innovation and creativity to provide custom-made ovens tailored to each customer's unique need.

Lab/Bench Ovens

The Lab/Bench series of ovens offer custom options at an affordable price with a large selection of sizes available. Each oven comes standard with the following features; voltage specific, UL listed control enclosure, airflow, TEFC circulation motor.

Continuous Process Ovens

Our Continuous Process Ovens feature welded steel structural units, heavy gauge interiors, and operate at temperatures up to 1250°F and are used for a wide range of applications.

Heat Treating Ovens

Heat Treating Ovens can be used for treating a variety of metals and glass to harden or soften a material through extreme heating and chilling. Heat Treating Ovens can be used for aging, annealing, drying, soldering, tempering, etc.

Walk-In Ovens

The Walk-In series of industrial ovens offer custom options at an affordable price with a large selection of sizes available. Each oven comes standard with the following features; UL listed control enclosure, airflow, TEFC circulation motor.

Industrial Oven Model Listings

Browse through our online industrial oven models: Industrial Cabinet Ovens, Industrial Custom Ovens, Industrial Lab/Bench Ovens, Industrial Continuous Process Ovens, Industrial Heat Treating Ovens, Industrial Walk In Ovens.

Contact Us

JPW Ovens & Furnaces matches up your needs to the right process equipment. View our contact information or request a quote today.

About Us

JPW Ovens & Furnaces makes custom-made industrial ovens. Our Cabinet, Custom, Lab/Bench, Continuous Process, Heat Treating, and Walk-In Ovens are crafted to suit our customers' needs. We offer design, prototyping, welding and assembly.

Warranty

All industrial ovens from JPW Ovens & Furnaces Inc. carry our standard warranty of 1 year on parts and 90 days on labor from the date of purchase.