Email JPW Industrial Ovens & Furnaces

ST8820G

ST8820G
Product Code: SKU0048
Price: $0.00
Ex Tax: $0.00
Qty:  
   - OR -   

The oven is designed to operate at 500°F maximum temperature and includes the following special features:

  • 4.5” thick insulated walls, ceiling and a 3/16” Plate floor
  • 1-30” Circulation fan
  • CRS exterior painted slate gray
  • Aluminized interior
  • UL listed Control Panel, 220/1/60 primary power
  • Yokogawa UT150 single set point electronic controller and a UT150L high limit
  • 800 CFM exhaust
  • 800,000 BTU modulating gas burner
  • NFPA 86 gas train
  • Modular for ease of assembly and expansion

Batch Oven Specifications:

Effective Work Area:

8’ 0” W x 8’ 0” H x 20’ 0” L

External Dimensions:

11’ 7” W x 9’ 0” H x 24’ 0” L

BTU:

800,000 BTU

Recirculation Fan:

13,000 CFM; 3 HP

Electric:

o 220/1/60 - 30 amps; 40 amp breaker recommended

Oven Construction: 

Outside:

Oven to be constructed of a heavy gauge sheet metal with structural reinforcements. The oven will be modular in sections.

Inside:

Oven interior to be constructed of Aluminized steel.

Circulation system:

One 30” Dia fan will be driven direct by a 3 hp TEFC motor, the airflow will enter the chamber from both sides and return through the rear. A pressure differential switch will monitor the circulation fan in the event of the loss of air the heating system will shut down.

Heating system:

An 800,000 BTU Maxon modulating burner will be located on the right rear of the oven and it will fire into the plenum to heat the air to desired temperature.

Doors:

The unit will have two doors held closed by FM approved slam latches. The doors will act as the relief panels.

Control Console:

The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated.

Exhaust:

An 800 CFM exhaust will be located on the rear of the oven offset to one side. A 3/4 HP 1725 rpm motor driving an 8” dia x 4” thick single inlet wheel. The exhaust will be activated by the oven on switch. An 8 inch dia. outlet will be provided for connection of the flu.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



News
09/27/2017

This month we focus on Ryan Deuel, an experienced machine operator and fabricator at JPW. Ryan contributes his skills to oven fabrication process through professional operation of the sheer, CNC punch press, press brake and other equipment.


09/22/2017

The HT343 is rated at 1250F and measures 36Wx36Hx48D. This model will be used for heat treating metals. It features combination airflow and even a custom color specific to the customer’s request.


Cabinet Ovens

These chambers are designed to meet your most demanding needs. Our precision engineering, heavy duty construction and exceptional performance along with a variety of airflow patterns and optional equipment provide the right solution for your heat processing requirements. Standard sizes range from 3.3 cuft up to 96 cuft and standard temperatures up to 650F. For chambers above 650F please inquire about our HT series cabinet ovens.

Custom Ovens

JPW Ovens & Furnaces offers the know-how, experience, innovation and creativity to provide custom-made ovens tailored to each customer's unique need.

Lab/Bench Ovens

The Lab/Bench series of ovens offer custom options at an affordable price with a large selection of sizes available. Each oven comes standard with the following features; voltage specific, UL listed control enclosure, airflow, TEFC circulation motor.

Continuous Process Ovens

Our Continuous Process Ovens feature welded steel structural units, heavy gauge interiors, and operate at temperatures up to 1250°F and are used for a wide range of applications.

Heat Treating Ovens

Heat Treating Ovens can be used for treating a variety of metals and glass to harden or soften a material through extreme heating and chilling. Heat Treating Ovens can be used for aging, annealing, drying, soldering, tempering, etc.

Walk-In Ovens

The Walk-In series of industrial ovens offer custom options at an affordable price with a large selection of sizes available. Each oven comes standard with the following features; UL listed control enclosure, airflow, TEFC circulation motor.

Industrial Oven Model Listings

Browse through our online industrial oven models: Industrial Cabinet Ovens, Industrial Custom Ovens, Industrial Lab/Bench Ovens, Industrial Continuous Process Ovens, Industrial Heat Treating Ovens, Industrial Walk In Ovens.

Contact Us

JPW Ovens & Furnaces matches up your needs to the right process equipment. View our contact information or request a quote today.

About Us

JPW Ovens & Furnaces makes custom-made industrial ovens. Our Cabinet, Custom, Lab/Bench, Continuous Process, Heat Treating, and Walk-In Ovens are crafted to suit our customers' needs. We offer design, prototyping, welding and assembly.

Warranty

All industrial ovens from JPW Ovens & Furnaces Inc. carry our standard warranty of 1 year on parts and 90 days on labor from the date of purchase.