HT445
Ex Tax: $0.00
The oven is designed to operate at 1100°F maximum temperature and includes the following special features:
- 8 thick insulated walls, ceiling and floor.
- 1 Stainless Circulation fan
- CRS exterior painted machine gray
- Stainless interior
- UL listed Control Panel
- Electronic single set point temperature controller
- High limit
- Door Switch
- Timer to signal end of cycle
- Visual alarm to indicate end of cycle with reset
- Uniformity +/- 10F
Batch Oven Specifications:
Effective Work Area: |
48 W x 60 H x 48 L |
External Dimensions: |
84 W x 108 H x 72 L |
KW: |
75 KW |
Recirculation Fan: |
7500 CFM; 5 HP |
Electric: |
TBD |
Oven Constuction:
Outside:
Oven to be constructed of heavy gauge carbon steel & structural members, painted machine gray
Inside:
Oven to be constructed of Type 304 Stainless Steel
Circulation system:
One 30 Dia fans and shaft, horizontal airflow from right to left. The pressure and return walls will be louvered for adjustability.
Heating system:
36- 2500 Watt heaters will be housed in the plenum area to heat the air to the desired temperature. The heat will be controlled an SCR located in the control panel.
Doors:
The unit will have two doors held closed by FM approved slam latches.
Control Console:
The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated
Uniformity:
The unit will pass a 9 point survey +/-10F in 80% of the empty chamber.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: