ST333GSR

ST333GSR
Product Code: SKU0023
Price: $0.00
Ex Tax: $0.00
Qty:  
   - OR -   

The oven is designed to operate at 550°F maximum temperature and includes the following special features:

  • 4.5” thick insulated walls, ceiling and a plate floor
  • 1” Circulation fan
  • CRS exterior painted machine gray
  • Aluminized interior
  • UL listed Control Panel
  • Yokogawa electronic UT150 single set point temperature controller and a UT150L high limit
  • Exhaust – 600 CFM
  • Eclipse burner (150,000 BTU)
  • Solvent rated for .25 gallons per batch
  • Purge timer set for 2 minutes

Batch Oven Specifications:

Effective Work Area:

36” W x 36” H x 36” L

External Dimensions:

72” W x 60” H x 84” L

BTU:

150,000 BTU

Recirculation Fan:

1800 CFM; 3/4 HP

Electric:

TBD

Oven Construction:

Outside:

The oven exterior will be constructed of heavy gauge carbon steel and painted machine gray

Inside:

The oven interior will be constructed of Aluminized steel.

Circulation system:

One 18” Dia fan will be driven direct by a ¾ hp 1725 rpm TEFC motor. The air pattern will be compound horizontal from sides to rear. The pressure and return walls will be louvered for adjustability. The circulation fan will have a pressure differential switch in the event of the loss of air the heating system will shut down.  

Heating system:

An Eclipse 150,000 BTU modulating gas burner and gas train will heat the air to the desired temperature and will fire into the plenum located in the rear of the unit.

Doors:

The unit will have two doors held closed by FM approved slam latches. The door gaskets will be a silicone P extrusion. The doors will act as the pressure relief.

Control Console:

The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated

Exhaust Blower:

A 600 CFM Exhaust blower will be mounted on the top right of the unit. The blower will be on at all times. An 8” dia x 4” thick single inlet wheel will be driven direct by a ¾ hp 1725 RPM TEFC motor.

Solvent Rated:

The unit will be solvent rated .250 gallons of solvent per batch.

Purge time:

The unit will have a purge time of 2 minutes. The heat will not turn on until the purge time has expired.

Read more about the various industries the ST333 is used in.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



News
09/19/2017

The HT432 is a high-temp cabinet oven measuring 48Wx36Hx24D. This oven is electrically heated and boasts a max operating temperature of 1300F, with a tight uniformity of +/- 10 at 600C. This high-temp cabinet oven will be used to facilitate a specialized process used to burn out binder.


07/21/2017

This month we focus on Steve Angle, electrical panel builder at JPW. Skilled and knowledgeable, Steve’s work in the Electrical Department has helped to develop JPW ovens into the reliable high-performance ovens they are today!


Cabinet Ovens

These chambers are designed to meet your most demanding needs. Our precision engineering, heavy duty construction and exceptional performance along with a variety of airflow patterns and optional equipment provide the right solution for your heat processing requirements. Standard sizes range from 3.3 cuft up to 96 cuft and standard temperatures up to 650F. For chambers above 650F please inquire about our HT series cabinet ovens.

Custom Ovens

JPW Ovens & Furnaces offers the know-how, experience, innovation and creativity to provide custom-made ovens tailored to each customer's unique need.

Lab/Bench Ovens

The Lab/Bench series of ovens offer custom options at an affordable price with a large selection of sizes available. Each oven comes standard with the following features; voltage specific, UL listed control enclosure, airflow, TEFC circulation motor.

Continuous Process Ovens

Our Continuous Process Ovens feature welded steel structural units, heavy gauge interiors, and operate at temperatures up to 1250°F and are used for a wide range of applications.

Heat Treating Ovens

Heat Treating Ovens can be used for treating a variety of metals and glass to harden or soften a material through extreme heating and chilling. Heat Treating Ovens can be used for aging, annealing, drying, soldering, tempering, etc.

Walk-In Ovens

The Walk-In series of industrial ovens offer custom options at an affordable price with a large selection of sizes available. Each oven comes standard with the following features; UL listed control enclosure, airflow, TEFC circulation motor.

Industrial Oven Model Listings

Browse through our online industrial oven models: Industrial Cabinet Ovens, Industrial Custom Ovens, Industrial Lab/Bench Ovens, Industrial Continuous Process Ovens, Industrial Heat Treating Ovens, Industrial Walk In Ovens.

Contact Us

JPW Ovens & Furnaces matches up your needs to the right process equipment. View our contact information or request a quote today.

About Us

JPW Ovens & Furnaces makes custom-made industrial ovens. Our Cabinet, Custom, Lab/Bench, Continuous Process, Heat Treating, and Walk-In Ovens are crafted to suit our customers' needs. We offer design, prototyping, welding and assembly.

Warranty

All industrial ovens from JPW Ovens & Furnaces Inc. carry our standard warranty of 1 year on parts and 90 days on labor from the date of purchase.