HT216

HT216
Brand: JPW Design & Manufacturing
Product Code: SKU0021
Price: $0.00
Ex Tax: $0.00
Qty:  
   - OR -   

The oven is designed to operate at 1000°F maximum temperature and includes the following special features:

  • 8” inch thick insulated walls, ceiling and floor with cart tracks (if required)
  • 1” Circulation fan
  • CRS exterior painted machine gray
  • Stainless Interior
  • UL listed Control Panel
  • Electronic temperature controller and high limit
  • 800,000 BTU burner
  • 800 CFM Exhaust Blower

Batch Oven Specifications:

Effective Work Area:

48” W x 72” H x 108” L

External Dimensions:

92 W x 92” H x 156” L

BTU:

800,000 BTU

Recirculation Fan:

7000 CFM; 5 HP

Electric:

TBD

Oven Construction:

Outside:

Oven to be constructed of heavy gauge carbon steel and structural members, painted machine gray

Inside:

Oven interior to be constructed of Stainless Steel.

Circulation system:

1-30 inch” Dia fan and shaft, Horizontal airflow from front to back. The circulation fan will have an airflow switch in the event of the loss of airflow the heating circuit will be de-energized.

Heating system:

One 800,000 BTU  gas burner will heat the air to desired temperature. The burner will be located in the rear of the unit.

Doors:

The unit will have two doors held closed by FM approved slam latches.

Control Console:

The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated.

Exhaust:

An 800 CFM powered exhaust will be located on the back of the unit. A six inch outlet will be provided to connect a stack. Stack requirements will be at a minimum 6” dia. The stack is recommended to not have more than one 90 degree elbow. The exhaust outlet temperature will be determined by the operating temperature. The exhaust blower will have an airflow switch in the event of loss of exhaust airflow the heating circuit will be de-energized. 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



News
09/19/2017

The HT432 is a high-temp cabinet oven measuring 48Wx36Hx24D. This oven is electrically heated and boasts a max operating temperature of 1300F, with a tight uniformity of +/- 10 at 600C. This high-temp cabinet oven will be used to facilitate a specialized process used to burn out binder.


07/21/2017

This month we focus on Steve Angle, electrical panel builder at JPW. Skilled and knowledgeable, Steve’s work in the Electrical Department has helped to develop JPW ovens into the reliable high-performance ovens they are today!


Cabinet Ovens

These chambers are designed to meet your most demanding needs. Our precision engineering, heavy duty construction and exceptional performance along with a variety of airflow patterns and optional equipment provide the right solution for your heat processing requirements. Standard sizes range from 3.3 cuft up to 96 cuft and standard temperatures up to 650F. For chambers above 650F please inquire about our HT series cabinet ovens.

Custom Ovens

JPW Ovens & Furnaces offers the know-how, experience, innovation and creativity to provide custom-made ovens tailored to each customer's unique need.

Lab/Bench Ovens

The Lab/Bench series of ovens offer custom options at an affordable price with a large selection of sizes available. Each oven comes standard with the following features; voltage specific, UL listed control enclosure, airflow, TEFC circulation motor.

Continuous Process Ovens

Our Continuous Process Ovens feature welded steel structural units, heavy gauge interiors, and operate at temperatures up to 1250°F and are used for a wide range of applications.

Heat Treating Ovens

Heat Treating Ovens can be used for treating a variety of metals and glass to harden or soften a material through extreme heating and chilling. Heat Treating Ovens can be used for aging, annealing, drying, soldering, tempering, etc.

Walk-In Ovens

The Walk-In series of industrial ovens offer custom options at an affordable price with a large selection of sizes available. Each oven comes standard with the following features; UL listed control enclosure, airflow, TEFC circulation motor.

Industrial Oven Model Listings

Browse through our online industrial oven models: Industrial Cabinet Ovens, Industrial Custom Ovens, Industrial Lab/Bench Ovens, Industrial Continuous Process Ovens, Industrial Heat Treating Ovens, Industrial Walk In Ovens.

Contact Us

JPW Ovens & Furnaces matches up your needs to the right process equipment. View our contact information or request a quote today.

About Us

JPW Ovens & Furnaces makes custom-made industrial ovens. Our Cabinet, Custom, Lab/Bench, Continuous Process, Heat Treating, and Walk-In Ovens are crafted to suit our customers' needs. We offer design, prototyping, welding and assembly.

Warranty

All industrial ovens from JPW Ovens & Furnaces Inc. carry our standard warranty of 1 year on parts and 90 days on labor from the date of purchase.